Printer's Network Setting for Wireless LAN Connection
When using a Wireless LAN connection, use the TMNet WinConfig to configure the network setting.
Connect the printer to the computer using the printer's UB-R03 USB connector.
1
Start the TMNet WinConfig.
When the TMNet WinConfig is already installed, start it by clicking [Start]-[All Programs]-[EpsonNet]-
[TMNet WinConfig]-[TMNet WinConfig Ver. x]
2
The "TMNet WinConfig Ver. x.xx" screen appears. Select [USB] from Interface.
Check that the target printer is listed in the screen.
3
Select the printer you want to configure, then click the [Configuration] button.
When the printer does not appear, click the [Search] button.
4
The "Network Interface Card Properties" screen appears. Select the [Wireless] tab.
5
Set the wireless LAN.
If the communication mode is Ad Hoc.
If the communication mode is Infrastructure
Chapter 2 Installation
Proceed to Step 6.
Proceed to Step 7.
2
25