Epson C31CA85090 Software User's Manual page 117

Serial
Configures the serial communication.
❏ When the communication speed is 38400 bps or lower
Referring to the preview on the right of the screen, change the DIP switch setting on the printer.
Turn off the printer power when changing DIP switch settings.
❏ When the communication speed is 38400 bps or higher
Turn off the printer power. After turning on the printer DIP switches 1 ‐ 7 and 1 ‐ 8, turn the
printer back on. Then start TM‐T88V Utility.
Setting
Communication speed:
Depend on DIP Switch
Parity:
Data Bit:
Stop Bit:
Selects the communication speed. The available settings vary
depending on whether [Depend on DIP Switch] is selected or not.
Selects which communication speed setting to use between DIP
switch setting and memory switch setting. Place a checkmark to use
the DIP switch setting. Deselect it to use the memory switch setting.
Configures the parity.
Configures the data bit.
Configures the stop bit.
Chapter 4 TM-T88V Utility
Description
4
117