Table of Contents
Advertisement
Network Address Setting for Ethernet Printer
If you are using an Ethernet connection, configure the IP address using the TMNet WinConfig.
1
Start the TMNet WinConfig.
When the TMNet WinConfig is already installed, start it by clicking [Start]-[All Programs]-[EpsonNet]-
[TMNet WinConfig]-[TMNet WinConfig Ver. x].
2
The "TMNet WinConfig Ver. x.xx" screen appears. Select [Ethernet] from Interface.
Check that the target printer is listed in the screen.
3
Select the printer you want to configure, then click the [Configuration] button.
When the printer does not appear, click the [Search] button.
4
The "Network Interface Card Properties" screen appears. Select the [TCP/IP] tab.
5
Configure the printer IP address. Then click the [OK] button.
Select the [Manual] and [Set using PING]. Then configure the IP Address, Subnet Mask and Default
Gateway.
Chapter 2 Installation
23
2
Advertisement
Table of Contents
