Attaching The Rubber Feet; Provide For Adequate Ventilation - D-Link 1016T - DGS Switch User Manual

Attaching the Rubber Feet

Use rubber feet provided. Position and apply rubber feet to the underside of the
DGS-1016T/1024T Switch.

Provide for Adequate Ventilation

CAUTION: Do not place any device on top of S witch, or
place the Switch on top of any devic e or object that will
block the free flow of air through the ventilation slots on
the sides, top, and bottom of the S witch's case. In
addition, care should be taken not to locate the Switch
next to, on top of, or underneath any device that
generates a significant amount of heat. For the Switch to
perform at its optimal level, the Switch must have
adequate
overheating and becoming damaged.
Attaching the Rubber Feet
ventilation
23
to prevent the Switch from