Before You Connect To The Network - D-Link 1016T - DGS Switch User Manual

Before You Connect to the Network

The site where you install the Switch may great ly affect its performance.
Please follow these guidelines for setting up the Switch.
•
Install the Switch on a sturdy, level surface that can support at least
3 kg (6.6 lbs) of weight. Do not place heavy objects on the Switch.
•
The power outlet should be within 1.82 meters (6 feet) of the Switch.
•
Visually inspect the power cord and see that it is fu lly secured to the
AC power port.
•
Make sure that there is adequate space for proper heat dissipation
fro m and adequate ventilation around the Switch. Leave at least 10 cm
(4 inches) of space at the front and rear of the Switch for ventilation.
•
Install the Switch in a fairly cool and dry place for the acceptable
temperature and humidity operating ranges.
•
Install the Switch in a site free fro m strong electro magnetic field
generators (such as motors), v ibration, dust, and direct exposure to
sunlight.
•
When installing the Switch on a level surface, attach the rubber feet to
the bottom of the device. The rubber feet cushion the Switch, protect
the casing from scratches and prevent it fro m scratching other
surfaces.
•
Do not place any device on top of Switch, or place the Switch on top
of any device or ob ject that will b lock the free flo w of air through the
ventilation slots on the sides, top, and bottom of the Switch's case.
•
Keep your hand away from top and bottom of device that generates a
significant amount of heat.
21