Table of Contents
Advertisement
Mounting the Switch on a Rack
The DGS-1016T/1024T can easily be mounted on a rack. Two mounting ears
are provided for this purpose. Make sure that the front panel is exposed in
order to view the LEDs. Please refer to the following illustrations:
1.
Attach the ears to each side of the Switch, using the screw-holes located
on the side of the device.
2.
Firmly attach the ears to the rack as shown. Please fo llow the usual safety
precautions for rack-mountable products.
Mounting the Switch to a Rack
22
Advertisement
Table of Contents
