Exploded View/Disassembly&Assembly Instructions
― Assembly SET-PBA
2
1
2. Attach the POWER KEY FPCB in
1. Attach the VOL KEY
accordance with the groove.
FPCB in accordance with
the groove.
3
4
4. Screw JOG KEY module to the PCB .
3.Connect the JOG KEY module to
the connector on the PCB.
5
6
5. Insert the KEY FPCB to the
6. Connect the KEY FPCB and attach the
CONNECTOR on the PCB.
insulation tape on the connector.
5-9
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization