Exploded View/Disassembly&Assembly Instructions
― Disassembly SET-Shield Case
1
2
2. Unscrew two points in the intenna.
1.Unscrew camera bracket located on
the PCB TOP side.
4
3
3
4
4. Insert tweezers into the backside of the
3. Insert tweezers into the backside of
LCD module and detach the double-stick tape
the LCD module and detach the double-
as shown in the figure.
stick tape as shown in the figure.
5
5. Disjoint LCD module as shown in
the figure.
5-6
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization