Samsung SGH-I607 - Hands-free Earbud Headset Service Manual page 30

Exploded View/Disassembly&Assembly Instructions
― Assembly SET-PBA
2
1
2. Attach the intenna
1.Screw intenna to the
wire to the PCB.
shield case.
4
3
4. Screw the PBA to the shield case.
5
3. Check that the
intenna wire should be
connected as shown in
the figure.
5.Connect LCD module to the
connector on the PCB.
5-8
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization