Choosing Wearing Preference; Making A Call; Ending A Call; Answering A Call - Jabra BT250 - Headset - Over-the-ear User Manual

IMPORTANT: Do not hold the button down for more than 3 to 5 seconds when
turning the headset on or else it may go into pairing mode, and the blue indicator light
will turn solid. If that happens, turn off the headset, wait 3 to 5 seconds, and repeat
process for turning the headset on.
6

Choosing wearing preference

Jabra BT250 is ready to wear on the right ear. If
you prefer the left, gently rotate the MiniGel 180°.
For optimal performance, wear Jabra BT250 and
your Bluetooth phone on the same side of your
body. In general, you will get better performance
when there are no obstructions (including parts of
your body) between the headset and the phone.
7

Making a call

If Jabra BT250 is off, turn it on now (see Turning headset on/off section).
Using phone's keypad
1. Dial number on keypad.
2. Press phone's "send" key.
Using voice-activated dialing (after you've set up voice tags on your phone)
1. Press and release once. You'll hear 1 short beep while doing this.
2. You'll then hear the voice-activation tone; say the name of the person you wish to call.
NOTE: Record voice tag from headset for better reception.
6
8

Ending a call

•
Press and release
OR
•
End call from phone's keypad
9

Answering a call

•
After you hear the ring tone, press and release
OR
•
Answer the call with your phone's keypad. You may then need to transfer the call to
the headset by pressing and releasing
10

Call-waiting*

•
(Recommended) Use standard method from your phone's keypad which typically
involves pressing the "send" button
Fig. 4
OR
•
Press and release once to answer the incoming call and toggle between calls
(some phones do not support this headset feature)
IMPORTANT: Do not hold the
answering a call. This should only be a quick tap, so you don't put the headset into
pairing mode by accident.
* See Enhanced features section for alternative call-waiting instructions for
phones that support the hands-free profile.
once
once
once (depending on your phone)
button down too long when making, ending, or
7