Threading The Machine - Janome Magnolia 7318 Instruction Manual

z
c
v
b
z
w
x
r
c
v
b
x
q
e
t
y

Threading the Machine

To set the needle thread:
Raise the thread take-up lever to the highest
position by turning the handwheel.
Raise the presser foot.
z Draw the thread from the spool and pass it
under the thread guide. Then draw it down
along the right channel.
q Thread guide
w Right channel
x Draw the thread up around the bottom of the
thread guide plate.
Pull the thread up along the left channel
e Thread guide plate
r Left channel
c Firmly draw the thread from right to left over
the thread take-up lever and down into the
take-up lever eye.
t Thread take-up lever
v Draw the thread down along the left channel
and slip the thread behind the needle bar
thread guide from the left.
y Needle bar thread guide
b Pass the thread through the needle eye from
the front or use the needle threader (refer to
the next page).
11