Adjusting Stretch Stitch Balance; Stitch Width Dial; Variable Needle Position - Janome Magnolia 7318 Instruction Manual

"–"
"+"
q
w

Adjusting stretch stitch balance

If the stretch stitch patterns are uneven when you
sew on a particular fabric, correct them by turning
the stitch length dial.
If the patterns are drawn out, correct them by
setting the dial to the "–" side.
If the patterns are compressed, correct them by
setting the dial to the "+" side.

Stitch Width Dial

Turn the stitch width dial to set the desired stitch
width number at the setting mark.
The higher the number, the wider the stitch
q Stitch width dial
w Setting mark
CAUTION:
Do not turn the stitch width dial while the needle
is in the fabric, otherwise the needle may bend
or break.

Variable needle position

The needle drop position of the straight stitches
can be moved between the center (5) and left (0)
with the stitch width dial.
14