Winding The Bobbin; Setting The Spool; Removing The Bobbin - Janome Magnolia 7318 Instruction Manual

(A)
q
(B)
w
r
t
q
w

Winding the Bobbin

Setting the spool

Place a spool of thread on the spool pin with the
thread coming off the spool as illustrated.
A: Press the large spool holder firmly against the
B: For a small spool, use the small spool holder.
Additional spool pin
The additional spool pin is for bobbin winding
e
without unthreading the machine.
Insert the additional spool pin into the hole.
Place the felt and a spool on the pin.

Removing the bobbin

z Push the hook cover plate release button to
x Lift out the bobbin.
e
8
spool of thread.
q Large spool holder
w Small spool holder
e Additional spool pin
r Spool pin felt
t Spool pin hole
the right and remove the cover plate.
q Hook cover plate release button
w Hook cover plate
e Bobbin