Omniswitch 6600-U24 - Alcatel-Lucent OmniSwitch 6600 Family Hardware User's Manual

OmniSwitch 6600 Family Chassis and Hardware Components

OmniSwitch 6600-U24

The OS6600-U24 is a stackable edge/workgroup switch offering 24 fiber 100 Mbps Ethernet SFP ports.
The OS6600-U24 can also be equipped with up to four Gigabit Ethernet ports for connections to a high
speed backbone or server.
The front panel of the OS6600-U24 chassis contains the following major components:
Console (RJ-45) port
•
Stack indicator LED
•
24 fiber 100 Ethernet SFP ports
•
One slot for OS6600-GNI-U2 (fiber) or OS6600-GNI-C2 (copper) Gigabit Ethernet uplink module
•
One slot for Gigabit Ethernet uplink module as described above or stacking module
•
The following SFP transceivers are available for the OS6600-U24:
SFP-100-LC-MM—100Base FX multimode 62.5/125 and 50/125 micron fiber, supports distances up
•
to 2 km; uses LC connectors.
SFP-100-LC-SM15—100Base FX single mode 9/125 micron fiber, supports distances up to 15 km;
•
uses LC connectors.
SFP-100-LC-SM40—100Base FX single mode 9/125 micron fiber, supports distances up to 40 km;
•
uses LC connectors.
SFP-100-MTRJ-MM—100Base FX multimode 62.5/125 and 50/125 micron fiber, supports distances
•
up to 2 km; uses MTRJ connectors.
Note. See "Installing SFPs (OS6600-U24)" on page 2-51
Refer to the illustration on the following page for more front panel information. For detailed LED descrip-
tions, refer to page 2-18. For information on the chassis rear panel, refer to
OmniSwitch 6600 Family Hardware Users Guide
for information on installing SFP transceivers.
September 2006
OmniSwitch 6600-U24
page 2-20.
page 2-4