Editing A Nav User Frequency - Garmin GNC 255 Pilot's Manual

3.3.2.3

Editing a Nav User Frequency

1. Press FUNC. Turn the LARGE knob to reach the Nav functions
2. Turn the SMALL knob to select the desired Nav User frequency
3. Turn the LARGE knob to select the WPT name. Turn the SMALL
4. After selecting the desired characters, press ENT.
5. Turn the LARGE knob to select the waypoint Type.
6. Turn the SMALL knob to select characters and Turn the LARGE
7. After selecting the desired characters, press ENT.
3-12
and then turn the SMALL knob to select the Nav User
Frequencies. Press ENT.
Figure 3-18 Nav User Frequency Function
and then press ENT. Press the Cursor knob to enable editing.
The frequency MHz value will be selected. Turn the SMALL
knob to select the MHz frequency value. Turn the LARGE knob
to move the cursor and then turn the SMALL knob to select
the kHz frequency value.
knob to select characters and turn the LARGE knob to move
the cursor.
Figure 3-19 Nav User Frequency Name Selection
knob to move the cursor.
Figure 3-20 Nav User Frequency Type Selection
Garmin GNC 255A/255B Pilot's Guide
190-01182-01 Rev. A