3.2.3
Com Database Frequencies
The GNC 255 contains a large database of Com frequencies that may be
recalled by identifier.
1. Press FUNC to access the Functions. With the Com Frequency
2. Turn the SMALL knob to select the desired character.
3. Turn the LARGE knob to move the cursor to highlight a
4. Repeat steps 2 and 3 to complete the desired identifier and
5. If available, the Frequency Type will be highlighted. Turn the
Press ENT Key To Set
Selected Freq As Standby
Press FLIP/FLOP Key To Set
Selected Freq As Active
6. Press and release the FLIP/FLOP key to set the selected
7. Press the ENT key to set the selected frequency as the Standby
190-01182-01 Rev. A
Turn LARGE Knob
Figure 3-9 Com Database Frequencies
Function highlighted, turn the SMALL knob to view the Com
Database function. Then, press ENT.
character.
then press the ENT key.
SMALL knob to select the desired frequency.
Selected Identifier
Figure 3-10 Selected Com Database Frequency
frequency as the Active frequency.
frequency.
Garmin GNC 255A/255B Pilot's Guide
To Move Cursor
Turn SMALL Knob
To Select Character
Selected Frequency
Turn SMALL Knob
To Select Freq Type
3-5