Com Frequencies; Recent Com Frequencies - Garmin GNC 255 Pilot's Manual

1. Press the FUNC key to access the Functions.
2. Turn the LARGE knob to select the COM, NAV, ICS, or SYS
3. Turn the SMALL knob to view the choices in each function.
4. Press the ENT key to access the function.
5. Press the FUNC key again to exit Functions.
3.2

Com Frequencies

The Com Frequencies category in the Functions section contains recently
used frequencies (Recent), user-defined frequencies (User), and a database of all
frequencies provided in the standard default memory (Database).
3.2.1

Recent Com Frequencies

The last 20 Com frequencies used are kept in the list of Recent Com
Frequencies and can be accessed in this function.
NOTE: When switching from 8.33 kHz to 25 kHz mode, any 8.33 kHz-
specific user frequencies will be deleted from the user frequency list. This
only affects the user frequencies within the 8.33 kHz spectrum.
1. Press FUNC to access the Functions. Turn the LARGE knob to
2. Turn the SMALL knob to select an Entry (1-20).
Press <-> To Make the
Selected Frequency The Active
3. Press and release the FLIP/FLOP key to transfer the displayed
3-2
functions.
select the Com Function. Turn the SMALL knob to view the
Recent frequency function. Then, press ENT.
Press ENT to Make the Selected
Frequency the Standby
Frequency
Figure 3-2 Recent Com Frequencies
channel to the Active frequency position. Press the ENT key
to transfer the displayed channel to the Standby frequency
position.
Garmin GNC 255A/255B Pilot's Guide
Turn SMALL Knob
To Select Entry
Selected Frequency
190-01182-01 Rev. A