Kyocera KM-F1060 Operating Instructions Manual page 91

3
3
7
PRESS START TO
CONTINUE
NOTE
2. The default original size is "LETTER". If you use the Multi-Size Feeding function, change the
default original size to "MIX" in the Copier Settings for Key Operator, Parameter No. 13
(ORIGINAL SIZE). (See page 117)
4
(For 2
4
8
SET ORIGINALS ON ADF
NOTE: If the page count for the Back side does not
match the page count for the Front side (i.e. page
double-fed) of the 2-Sided originals, a "SIDE 1&2 PAGE
COUNTS DO NOT MATCH!" and "RESCAN
ORIGINALS START WITH 1ST SIDE" will be displayed
and all scanned data will be cancelled. If this occurs,
restart from Step 1 and Steps 5-
5
1 Copy only)
5
9
to Step 7.
6
After the copying
is completed,
press
STOP
to go back to
Fax mode.
6
After the copying
is completed,
press
STOP
to go back to
Fax mode.
91