Thumbscrew On The Front Panel; System Lcd - HP j6700 - Workstation Service Handbook

Thumbscrew on the Front Panel

There is one captive thumbscrew near the center of the front panel. Loosening and pulling
toward you with this screw allows the top panel to be removed. The top panel must be in
place or the system will not power up.
Between the LCD panel and the CD ROM drive, there is a threaded hole for an optional
locking screw. The locking screw is included in the bag of miscellaneous parts which comes
with the workstation. This locking screw allows the user to protect his/her workstation
form unwanted entry.

System LCD

The Liquid Crystal Display (LCD) indicator is located on the front panel. The LCD has two
16 characters lines. The LCD displays messages about the state of the system, including
chassis codes. The symbols in Figure 1-3 appear in the LCD if you have the HP-UX 11.0 or
11i operating system booted on your system. They represent the different system
activities.
Figure 1-3. LCD Symbols
Chapter 1
Operating system running (Heart Beat)
Disk access in progress
Network receive in progress
Network transmit in progress
Product Information
Front Panel Components
15