Lockups And Software Problems - Dell Dimension 2010 Setup Manual

Solving Problems
Lockups and Software
Problems
If the computer does not start up — Ensure
that the power cable is firmly connected to the
computer and to the electrical outlet.
If a program stops responding — End the
program:
1. Press <Ctrl><Shift><Esc> simultaneously.
2. Click Applications.
3. Click the program that is no longer
responding
4. Click End Task.
If a program crashes repeatedly — Check the
software documentation. If necessary, uninstall
and then reinstall the program.
NOTE: Software usually includes
installation instructions in its
documentation or on CD.
34
If the computer stops responding or a solid blue
screen appears —
CAUTION: You might lose data if you are
unable to perform an operating system
shutdown.
If you are unable to get a response by pressing
a key on your keyboard or moving your mouse,
press and hold the power button for at least 8
to 10 seconds until the computer turns off. Then
restart your computer.
If a program is designed for an earlier
Microsoft Windows
® ®
Run the Program Compatibility Wizard. The
Program Compatibility Wizard configures a
program so that it runs in an environment
similar to non-Windows operating system
environments.
NOTE: The following instructions are
applicable for the Windows default view,
and may not apply if you set your computer
to the Windows Classic view.
operating system —