Symantec 10067161 - 10PK NORTON ANTIVIRUS Product Manual page 218

218 Protecting Internet activities
About the Network Security Map
Modifying the communication port for Network
Security Map
3 In the Network Security Map window, in the
network map, click the device for which you want
to see the details.
You can view the details of only the computers that
you remotely monitor.
4 In the device details section, next to Category, click
Details.
5 In the Device Details window, view the details of
the device.
6 Click Close.
The Network Security Map settings lets you configure
the communication port number that Norton products
use to communicate with each other over a network.
By default, Norton products use 31077 as the
communication port number.
If you change the communication port number of your
Norton product, you must change it on every computer
that is connected to your home network. In addition,
when you find more computers that use the Remote
Monitoring Setup process, ensure that the same port
number is used on every computer.
w
Though you can modify the communication port
number, it is recommended that you do not change this
port number. If you change the communication port
number, you must use a port number in the range of
1-65535.
To modify the communication port for Network Security
Map
1 In the Norton AntiVirus main window, click
Settings.
2 In the Settings window, click the Network tab.