Remote Specifications; Gpi Input Terminal - Panasonic BT-LH1850 Operating Instructions Manual

REMOTE Specifications

This monitor permits remote operation via GPI input terminal, RS-232C input terminal or RS-485 input/output terminal.

GPI input terminal

GPI screen items correspond to the following terminals. Use the GPI menu to
assign functions to each terminal (→page 37).
The functions assigned to each terminal are executed as specified depending on
whether GND (pin 5) is short-circuited (ON) or open (OFF).
„ Operating conditions
„
Level operation: Operates when GND is short-circuited.
Edge operation: Operates when GND changes from open to short-circuited.
<Note>
• When level operation is assigned to more than one terminal, the function operates as long as one
of the terminals is short-circuited.
• Hold the edge operation for at least 0.2 seconds after the change.
Assigned item
UNDEF
MARKER1
*
ON/OFF 1
MARKER2
*
ON/OFF 1
MARKER BACK HALF *
2
*
MARKER BACK BLACK
CENTER MARKER
CROSS MARKER
INPUT SEL. VIDEO
INPUT SEL. SDI1
INPUT SEL. SDI2
INPUT SEL. HDMI
INPUT SEL. DVI-I
INPUT SEL. INT SG
SD ASPECT
SCAN
*
R-TALLY 3
*
G-TALLY 3
MONO
GAMMA SEL. FILM
GAMMA SEL. STDIO/PST
*
1
When a 16:9 marker and a 4:3 marker are simultaneously selected and activated on a 16:9 aspect ratio display, both markers are
displayed.
*
2
When a 16:9 marker and a 4:3 marker are simultaneously displayed, the background of the marker selected by the 16:9 marker is controlled.
*
3
When "R-TALLY" and "G-TALLY" simultaneously go on, the tally color changes to amber.
44
Function
Undefined (no function assigned)
Switches marker display defined in "GPI MARKER1"
(→page 23) in the "MARKER" menu.
Switches marker display defined in "GPI MARKER2"
(→page 23) in the "MARKER" menu.
Reduces the brightness of the background outside the
marker displayed in "GPI MARKER1" (→page 23) to 50 %.
2 Reduces the brightness of the background outside the
marker displayed in "GPI MARKER1" (→page 23) to 0 %.
Turns the center marker display on and off. (When other
markers are displayed, this marker is superimposed on
other markers.)
Turns the cross marker display ON and OFF.
(When other markers are displayed, this marker is
superimposed on other markers.)
Switches the input line to VIDEO.
Switches the input line to SDI1.
Switches the input line to SDI2.
Switches the input line to HDMI.
Switches the input line to DVI-I.
Switches the input line to INT SG.
Sets the aspect ratio for SD signal input. (Disabled
during HD signal input)
Switches the scan mode between "UNDER" and
"NORMAL".
Lights the red tally.
Lights the green tally.
Switches between color and monochrome (MONO).
Switches the gamma curve to FILM mode.
Switches the gamma curve to STDIO/PST mode.
Pin number
GPI input terminal
(9P)
Operating conditions
—
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Edge operation
Edge operation
Edge operation
Edge operation
Edge operation
Edge operation
Level operation (Short-circuited: 16:9,
open: 4:3)
Level operation (Short-circuited: UNDER,
Open: NORMAL)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation (Short-circuited:
monochrome, Open: color)
Level operation (Short-circuited: FILM mode,
Open: STANDARD mode)
Level operation (Short-circuited: STDIO/
PST mode, Open: STANDARD mode)
Signal
1 GPI1
2 GPI2
3 GPI3
4 GPI4
5 GND
6 GPI5
7 GPI6
8 GPI7
9 GPI8