Audio - Panasonic BT-LH1850 Operating Instructions Manual

Main menu
(continued)

AUDIO

Sets the audio level meters to audio output (speakers, headphones).
Sub menu
INPUT SELECT AUTO
ANALOG
* * *
SELECT L 1 2 4 CH1 - CH8
(Factory default: CH1)
* * *
SELECT R 1 3 5 CH1 - CH8
(Factory default: CH2)
SPEAKER OUT MIX
L
R
LEVEL METER OFF
ON
*
CH SELECT 6 2CH
4CH
8CH
POINT LINE OFF
ON
CH INFO. OFF
ON
*
HEAD ROOM 7 12dB
18dB
20dB
*
1
When CH 5 to 8 are selected during SD signal input to the SDI terminal:
The channel can be switched from CH5→CH1, CH6→CH2, CH7→CH3, and CH8→CH4. (The menu settings remain as is.)
*
2
When an HDMI signal is input, CH1 audio is output regardless of the menu setting.
*
3
When an HDMI signal is input, CH2 audio is output regardless of the menu setting.
*
4
When analog audio is selected, L audio is output regardless of the menu setting.
*
5
When analog audio is selected, R audio is output regardless of the menu setting.
*
6
When an HDMI signal or analog signal is input, 2CH is displayed regardless of the menu setting. When an SD-SDI signal is input,
4CH is displayed even when 8CH is selected in the menu.
*
7
When an analog signal is input, the reference point is 20 dB regardless of menu setting.
*
8
Factory default setting for the BT-LH1850E.
*
9
Factory default setting for the BT-LH1850P.
Settings
Selects speaker, headphones output and audio level meter indication.
<AUTO>
<ANALOG> Analog (AUDIO input terminal)
Selects embedded audio channel output to the speaker or headphones (L).
Selects embedded audio channel output to the speaker or headphones (R).
Selects SPEAKER OUT status.
<MIX> Outputs a combination of the sound selected with [SELECT L] and [SELECT R].
<L> Outputs the sound selected with [SELECT L].
<R> Outputs the sound selected with [SELECT R].
Turns the audio level meter indication on and off. (→page 16)
Selects number of audio level meter channels.
Turns the 0 dB line (reference point) indication on the meter on and off.
Switches the channel displayed on the meter on and off.
Sets the display position of the reference point in the meter display.
*
8
* 9
The underlined values are factory preset setting values.
Description
When an SDI input line is selected with the INPUT SELECT button
(→page 11) on the front panel: Embedded audio (SDI terminal)
When an HDMI input line is selected with the INPUT SELECT button
(→page 11) on the front panel: Embedded audio (HDMI terminal)
When an input line other than SDI1, SDI2 or HDMI are selected with the
INPUT SELECT button (→page 11) on the front panel: Analog (AUDIO
input terminal)
39