Tuning In To Strong Signals; Using Itunes Tagging; Switching The Seek Mode; Switching The Reception Mode - Pioneer AVH-X8500BHS Owner's Manual

HD Radioä tuner
1 Display the preset channel list screen.
Refer to HD Radio tuner operations on page 12.
The preset channel list appears in the display.
2 Touch BSM to turn BSM on.
The six strongest broadcast frequencies will be
stored under preset channel keys in order of
their signal strength.
# To cancel the storage process, touch Cancel.

Tuning in to strong signals

Local seek tuning allows you to tune in to only
those radio stations with sufficiently strong sig-
nals for good reception.
FM: Off
AM: Off
The more there are on the screen, the fewer
the stations that can be selected. Only stations
with the strongest signals in your local area can
be selected.
If there are fewer , this unit will be able to re-
ceive broadcasts from weaker stations.

Using iTunes tagging

For more details about iTunes tagging, refer to
About iTunes tagging on page 65.
Storing the tag information to
this unit
1 Tune in to the broadcast station.
2 Store the tag information to this unit.
Refer to HD Radio tuner operations on page 12.
You can store the information if the Tag indica-
tor is displayed while the desired song is being
broadcast.
# While storing the tag data on this unit, Tag
flashes.
# The tag information for up to 50 songs can be
stored on this unit.
# Depending on the timing of when the tag infor-
mation is stored, the tag information for the song
played before or after the currently playing song may
also be stored.
# If an SD is selected as the source while tag infor-
mation is being stored to this unit, the tag informa-
tion will not be transferred to the iPod.
3 When completed, indicator turns
off and indicator is displayed.
Storing the tagged information
to your iPod
1 Connect your iPod.
When your iPod is connected to this unit, your
iPod starts storing the tagged information auto-
matically.
# While transferring the tag, you cannot select the
SD source.
2 When completed, indicator turns off
and the tagged information is stored on
your iPod.

Switching the seek mode

There are two seek tuning settings, one is HD
(Digital broadcasting stations seek) and the
other is ALL (normal seek).
ALL HD
HD Radioä tuner

Switching the reception mode

If the reception for a digital broadcast becomes
poor, this unit automatically switches to the ana-
log broadcast of the same frequency. If this
function is set to D/A AUTO, the tuner switches
between digital broadcast and analog broadcast
automatically. If this function is set to ANALOG,
the tuner will only receive analog broadcasts.
D/A AUTO ANALOG
Section
06
13
En