Switching The Ring Tone; Using The Preset Dial Lists; Making A Call By Entering Phone Number; Setting The Private Mode - Pioneer AVH-X8500BHS Owner's Manual

Bluetooth telephone
% Touch the volume key to select
Far-End VOL.
1 2 3
# This function can be performed even while talk-
ing on the phone.
# Settings can be stored for each device.

Switching the ring tone

You can select whether or not to use this unit s
ring tone. If this function is set to on, the ring
tone for this unit will sound.
1 Connect your cellular phone to this unit.
2 Touch the tone key to turn the ring tone
on or off.

Using the preset dial lists

You can easily store up to six phone numbers as
presets.
1 Touch the preset dial key to display the
preset screen.
2 Touch one of the phone numbers to se-
lect.
# If you want to delete a preset phone number,
touch and hold the phone number you wish to de-
lete.
3 Touch the off-hook key to make the call.
4 Touch the on-hook key to end the call.
Making a call by entering
phone number
13 APR
12:25
PM
1
Abcdefghi
1 2 3
XXXXXXXXXXXXXXXX
4 5 6
7 8 9
* 0 #
+
C Private Vol
ON
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this
operation.
1 Touch the key pad key to start entering
the phone number.
2 Touch the number icons to input the
numbers.
# Up to 32 digits can be entered.
3 Touch the off-hook key to make the call.
4 Touch the on-hook key to end the call.
Note
Entering phone number mode cannot be oper-
ated unless a Bluetooth telephone is connected
to this unit.

Setting the private mode

During a conversation, you can switch to private
mode (talk directly on your cellular phone).
% Touch the private mode key to turn pri-
vate mode on or off.
Bluetooth telephone

Voice control

If your iPhone is connected to this unit, you can
use voice commands to make calls, for example.
1 Touch the voice control key.
The display switches to the voice control screen.
You can also switch to the voice control screen
by pressing and holding down the home button
while the source is on.
13 ARP 12:25
OFF
PM
1
Voice control
2 Start voice control.
Indicates that continuous calls
can be made uninterrupted.
Indicates that the display is
closed.
Notes
! In order for your voice commands to be rec-
ognized and interpreted correctly, ensure
that conditions are suitable for recognition.
! Please note that wind blowing through the
vehicle windows and noise coming from out-
side the vehicle can interfere with voice com-
mand operation.
! For optimum pick-up, the microphone should
be placed directly in front of the driver at a
suitable distance.
! Speaking too soon after the start of the com-
mand may cause voice recognition to fail.
! Speak slowly, deliberately, and clearly.
Section
15
35
En