Npe-225, Npe-200, Npe-175, Npe-150; Npe-100; Bandwidth Table - Cisco 7206VXR - VPN Bundle Router Supplementary Manual

Bandwidth and Bandwidth Point Requirements

NPE-225, NPE-200, NPE-175, NPE-150

•
•
•

NPE-100

•
•
•

Bandwidth Table

Use the table below to determine the bandwidth points for your port adapter and I/O controller.
Cisco 7200 Series Port Adapter Hardware Configuration Guidelines
1-14
Port adapters are labeled as high, medium, and low.
Bandwidth point rules:
No more than three high-bandwidth port adapters, and
–
No more than five total medium- and high-bandwidth port adapters, and
–
No more than 800 total bandwidth points per system
–
Distribute port adapter bandwidth points evenly across both left and right system slots (buses).
Port adapters are labeled as high, medium, and low.
Bandwidth point rules:
No more than two high-bandwidth port adapters, and
–
– No more than four total medium- and high-bandwidth port adapters, and
No more than 800 total bandwidth points per system
–
Distribute port adapter bandwidth points evenly across both left and right system slots (buses).
Chapter 1 Cisco 7200 Series Port Adapter Installation Requirements
OL-3875-11