Bandwidth Calculation Table; Messages For One Port Use Of Specific Port Adapters And An I/O Controller - Cisco 7206VXR - VPN Bundle Router Supplementary Manual

Bandwidth Calculation Table

Bandwidth Calculation Table
Use
Table 1-7
Left Bus
Port Adapters:
I/O Controller:
Total points left bus:
Messages for One Port Use of Specific Port Adapters and an I/O
Controller
For the PA-2FE-FX, PA-2FE-TX, PA-POS-2OC3, and I/O controller c7200-I/O-2FE/E using only one
port—with what would normally be oversubscription of bandwidth points but is allowed because of the
strict use of only one port—the following messages appear in these Cisco IOS releases: Cisco IOS
Release 12.3(9), Cisco IOS Release 12.1(24)E, Cisco IOS Release 12.2(25)S, and Cisco IOS Release
12.0(29)S.
Cisco 7200 Series Port Adapter Hardware Configuration Guidelines
1-22
Table 1-7 to calculate the bandwidth points for your router.
Calculating the Bandwidth Points for Your Router
Chapter 1 Cisco 7200 Series Port Adapter Installation Requirements
Bandwidth
Points Right Bus
Port Adapters:
Total points right bus:
Bandwidth
Points
OL-3875-11