Troubleshooting; Specification; Remote Control - Haier LY26R3A Instruction Manual

PLAYING A JPEG CD
1.Insert a JPEG CD in the same way as you would a DVD or Audio CD, with the label
facing away from you.
2.The CD will load and a menu of the disc's contents will appear on screen.
3.Use the and buttons to highlight the folder and picture you wish to view and press
PLAY/PAUSE. Each image on the disc will show consecutively, like a slide show.
4.Press PLAY/PAUSE during the slide show to pause on one image.
5.Press the or button to skip to the next image or return to the previous one.
PLAYING AN AUDIO CD
1.Insert a CD in the same way as you would a DVD, with the label facing away from you.
2.The CD will load and a menu of the disc's contents will appear on screen.
3.Use the and buttons to highlight the track you wish to play and press PLAY/PAUSE,
or just press PLAY/PAUSE to listen to the whole CD from the beginning.
You can stop, pause, fast forward or fast rewind a CD in the same way as a DVD.
You can also use the REPEAT button to repeat a track, folder album or the contents of
the whole disc. Press repeatedly to select what you would like to repeat. You can also
use the A-B function to repeat a certain section of a track or CD.

Specification

SCREEN SECTION
Type A-si TFT active matrix
Viewable angle 160(H) 150 (V) (S626/S626D)
176 (H) 176 (V) (S632F/S632D /S642F)
Colour system PAL, SECAM, NTSC (AV)
TV/VIDEO SECTION
Sound system BG, DK, I, L
Video input SCART, S-VIDEO, YPb/Pr, YCb/Cr, AV,VGA,
HDMI,USB
GENERAL SECTION
DTV Y/Pb/Pr Composite: 480i/p, 576i, 720p, 1080i, 1080p
Power See rating plate
Power consumption See rating plate
Dimensions (W x D x H) cm
63.3 x 20.0 x 49.7 (including base)
63.3 x 20.0 x 49.7 (including base)
79.8 x 23.0 x 57.5 (including base)
79.8 x 23.0 x 57.5 (including base)
102.2 x 28.9 x 70.4 (including base) (
66.2 x 20.0 x 50.0 (including base)
66.2 x 20.0 x 50.0 (including base)
79.6 x 23.0 x 59.0 (including base)
79.6 x 23.0 x 59.0 (including base)
102.0 x 29.0 x 72.4 (including base) (
Environment conditions Working temperature: +5 C - +35 C
Working humidity: 20% - 80%
Storage temperature: -15 C - +45 C
Storage humidity: 5% - 90%
Accessory User manual

Remote control

Base cover (Only for S642F )
Battery (x2)
The part specifications of this TV set provided here are for reference only.
Differences may occur as product technology is updated.
Design and specifications are subject to change without notice.

TROUBLESHOOTING

To assist in location of possible faults use the help guide below:
No picture, no sound
Blank screen
No sound
Poor sound
No picture in some
channel
No color for some channel
program (black and white)
Spots with some or
all pictures
Television out of control
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized
service centre.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as the TV set has dangerous voltages in side that may cause a
fatally or fire.
( LT26K3 )
( LY26K3 )
( LTF32K3 )
( LY32K3 )
LTF42K3 )
( LT26R3 )
( LY26R3 )
( LTF32R3 )
( LY32R3 )
LTF42R3 )
Verify if the television is properly plugged in.
Verify if the television has a proper supplied power source.
Verify if electricity is available.
Verify if correct signals are input.
Operate the remote to change signal input to correct input.
Restart the television if power supply is interrupted.
Press MUTE button and verify if Mute mode is set.
Switch to other channel and verify if the same problem
happens.
Press VOL+ button to see if the problem can be solved.
Verify if sound system is correct. Refer to user's manual
for adjustment.
Verify if correct channel is selected.
Adjust the antenna.
Verify if the same problem exists in other channels.
Check out of picture and sound systems.
Refer to relative instructions in the Manual for color
adjustment.
Verify if the antenna is correctly connected.
Verify if the antenna is in good condition.
Make fine adjustment of channel.
Disconnect the television from power supply and 10
seconds later, connect the television to the power supply.
If the problem still exists, contact authorized after-sales
service for technical assistance.