Extended Wi-Fi Setup - D-Link DAP-1320 User Manual

Section 3 - Configuration
This page allows you to configure the wireless LAN settings for your DAP-1320. You have the option of creating a new Wi-Fi
Network Name for your DAP-1320 or you may use the same Wi-Fi Network Name as your wireless router or AP.
Wi-Fi Network
Displays the current Wi-Fi Network Name you are
Name:
connected to.
Extended Wi-Fi
Select Same as Wi-Fi Network Name or Create a new
Network Name:
Wi-Fi Network Name.
Channel Width: Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are
using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless
clients.
Security Mode:
Select WEP or WPA Personal. Refer to page 22.
D-Link DAP-1320 User Manual

Extended Wi-Fi Setup

21