Section 3 - Configuration
Save to Local
Use this option to save the current DAP-1320 configuration
Hard Drive:
settings to a file on the hard disk of the computer you are
using. Click the Save button. You will then see a file dialog
where you can select a location and file name for the settings.
Upload from
Use this option to load previously saved DAP-1320
Local Hard Drive:
configuration settings. Click Browse to find a previously
saved configuration file. Then, click the Upload Settings
button to transfer those settings to the DAP-1320.
Restore to
This option will restore the DAP-1320 back to the factory
Factory Default:
default settings.
Reboot the
Device:
Click to reboot the DAP-1320.
D-Link DAP-1320 User Manual
System
25