Using Wi-Fi Protected Setup (Wps) - D-Link COVR-P2502/E User Manual

Section 4 - Adding Additional Extenders

Using Wi-Fi Protected Setup (WPS)

The fastest and easiest way to add more COVR-P2500 extenders to your Covr Powerline network is by using the WPS button
on the side panel of each device. Refer to the steps below to learn how to add more COVR-P2500 extenders to your Powerline
network using the WPS button.
1. Plug the new COVR-P2500 extender into a power socket near the
existing router-connected COVR-P2500 extender.
2. Once plugged in, wait for the Power, 2.4G, and 5G LEDs on the new
extender to light up solid green, as shown in the image to the right.
D-Link COVR-P2502 User Manual
1
n
G
G
G
n
G
G
36