Changing Presser Feet - Brother PQ-1300 Operation Manual

Changing Presser Feet

Note
Make sure the power is off before changing presser feet.
Changing Sewing Feet
(Zipper Foot)
1 Raise presser foot, and raise
needle to highest position.
2 Loosen and remove screw using
screwdriver.
3 Attach zipper foot and tighten
screw.
The same method is used for
changing all sewing feet.
Use the position knob on back of
the zipper foot to adjust position
of foot in relation to needle.
16 12
Presser Feet
Pin Feed Foot
For perfect stitching on otherwise
difficult fabrics like velvet, leather
and suede.
Regular Foot
This foot is used for most sewing.
(Included with sewing machine.)
Can also be used with pin feeding
Rolled Hem Foot
Use on the edges of fabric, such
as on hems of dress shirts, to fold
the edge of the fabric in three
while sewing.
Zipper Foot
Use to attach fasteners other
than concealed fasteners.
Invisible Zipper Foot
Use to attach concealed fasteners.