HP StorageWorks 600 - Modular Disk System Maintenance And Service Manual page 35

Hp storageworks 600 modular disk system maintenance and service guide

Hide thumbs Also See for StorageWorks 600 - Modular Disk System:

Table of Contents

Push up and hold the two release mechanisms on the I/O bays, and then push the drawer forward

about 15 cm (6 in).

WARNING:

TIP HAZARD! To reduce the risk of personal injury or damage to the equipment,

do not extend the hard drive drawers beyond the supporting surface when the unit is not

installed in a rack.

WARNING:

To reduce the risk of personal injury or damage to the equipment, ensure that

only one hard drive drawer is extended at a time.

WARNING:

To reduce the risk of electric shock or damage to the equipment:

Never reach inside the chassis while the system is powered up.

•

Perform service on system components only as instructed in the user documentation.

•

Remove the power block

10.

("Power

block" on page 39).

Removal and replacement procedures 35

Table of Contents