Installing The Fbwc Capacitor Pack - HP ProLiant DL385p User Manual

Connect the capacitor pack cable to the connector on the top of the cache module.
8.
Install the access panel (on page 25).
9.
Install the server into the rack
10.
Connect each power cord to the server.
11.
Connect each power cord to the power source.
12.
Power up the server (on page 23).
13.

Installing the FBWC capacitor pack

CAUTION:
pinout. Do not use this controller with cache modules designed for other controller models,
because the controller can malfunction and you can lose data. Also, do not transfer this cache
module to an unsupported controller model, because you can lose data.
To install the component:
Back up all data.
1.
Close all applications.
2.
CAUTION:
powered down and the last to be powered back up. Taking this precaution ensures that the system
does not erroneously mark the drives as failed when the server is powered up.
Power down the server (on page 23).
3.
Remove all power:
4.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 23).
5.
Remove the access panel (on page 25).
6.
Install the FBWC module
7.
already installed.
("Installing the server into the
The cache module connector does not use the industry-standard DDR3 mini-DIMM
In systems that use external data storage, be sure that the server is the first unit to be
("Installing the flash-backed write cache
rack" on page 40).
module" on page 62), if it is not
Hardware options installation 63