Asr Status; Asr Timeout; Thermal Shutdown; Wake-On Lan - HP ProLiant DL380e User Manual

Rom-based setup utility
Hide thumbs Also See for ProLiant DL380e:
Table of Contents

Advertisement

ASR Status

The ASR Status option is a toggle setting that either enables or disables ASR. When set to Disabled, no
ASR features function.

ASR Timeout

The ASR Timeout option sets a timeout limit for resetting a server that is not responding. When the server
has not responded in the selected amount of time, the server automatically resets. The available time
increments are:
10 minutes
15 minutes
20 minutes
30 minutes
5 minutes

Thermal Shutdown

The Thermal Shutdown option is a toggle setting that determines when the server automatically powers
down due to dangerous temperatures. When the setting is enabled (default), the Advanced System
Management Driver initiates a system shutdown when the temperature reaches within 5 degrees of critical
level. When the setting is disabled, the Advanced System Management Driver shuts down the system at
critical level.

Wake-On LAN

The Wake-On LAN option is a toggle setting that enables or disables the Wake-On LAN feature. When
set to Enabled, the server can be powered up remotely using a network controller. When changing to
Enabled, the following caution displays:
When enabling Wake-on LAN, remove all power cords before adding or
removing any adapters. Some adapters can cause the system to power on
when added or removed.

POST Speed Up

The POST Speed Up option is a toggle setting that enables or disables the extended power-up memory
test. When POST Speed Up is set to Enabled, the extended power-up memory test is not executed, and
the server powers up more quickly.

POST F1 Prompt

The POST F1 Prompt option is a toggle setting that configures the server so the F1 key must be pressed to
proceed when an error is encountered during the power-up sequence. A series of system tests executes
during POST before continuing with the following:
If failures occur that allow the system to continue operating, the system continues to boot but posts a
message.
RBSU menu (HP ProLiant G6 and earlier servers or server blades) 116

Advertisement

Table of Contents
loading

Table of Contents