Bios Serial Console Port - HP ProLiant DL380e User Manual

more aesthetically appealing to some users. ANSI is the recommended choice if it meets the system
requirements. CLI support is available on some new servers for faster, more compatible display when
configuring a server using VT100 emulation. For more information, see "Command Line Interface
Overview (on page 140)."
When viewed in BIOS Serial Console, the RBSU main menu looks slightly different from the local server
view.
The following menu options are available:
•
BIOS Serial Console Port (on page 121)
•
BIOS Serial Console Baud Rate (on page 122)
•
EMS Console (on page 122)
•
BIOS Interface Mode (on page 123)

BIOS Serial Console Port

The BIOS Serial Console Port option provides additional selections for enabling BIOS Serial Console.
Selecting the Enable Remote option without the supported RILOE II or iLO firmware will result in an error:
The setting Enable Remote requires RILOE-II or iLO with firmware version
1.20 or greater (1.41 or greater with iLO firmware recommended). Do not
use the Enable Remote setting if iLO is Disabled and RILOE-II is not
installed.
RBSU menu (HP ProLiant G6 and earlier servers or server blades) 121