Hba_Ww_Id; Hostmode; Acu Scripting Error Messages - HP ProLiant DL320e User Manual

The string can consist of the following:
A maximum of 16 characters
Embedded space characters but cannot end with a space character
Any of the following characters: a–z, A–Z, 0–9, !, @, #, *, (, ), -, _, +, :, ., /, and [space]

HBA_WW_ID

This option specifies which HBA, based on its assigned WWN, is modified by the configuration
changes.

HostMode

This option specifies the HostMode for a selected HBA. Setting the Host Mode optimizes the storage
array for the selected operating system. The available host modes for an HBA are device-specific.
Not all modes are available on all devices. Not all HBAs support a HostMode.
The following operating system options might be available:
Default
Microsoft Windows
OpenVMS
Tru64
Linux
Solaris
Netware
HP-UX

ACU scripting error messages

Error code Error message
1 General error.
268 Error saving controller.
278-282 Controller is locked by another machine or
user.
290 Error communicating with controller.
516 Internal error.
1052 Array requires an odd number of drives.
1053 Cannot remove physical drives from
existing array.
1065- 1 066 Too many coinciding expansion, migration,
or extension operations.
Comment or clarification
The ACU process cannot be initiated. You might see this error
message if you are not authenticated to use ACU or if ACU
is already running.
ACU cannot save one or more controller configurations.
—
—
An error occurred during the configuration process, but ACU
cannot identify the error because there is an internal ACU
error.
This error message occurs if you attempt to add an odd
number of drives to an array that has RAID 1 logical drives,
and the controller does not support RAID-level migration.
This error message occurs if a script that is running in
Reconfigure action mode lists fewer physical drives than
already exist in the array. ACU interprets this script as a
request to remove physical drives from an existing array, but
satisfying this request causes data loss, so ACU prevents the
script from running.
ACU does not support multiple simultaneous expansions,
migrations, or extensions without saving the configuration
Using HPACUSCRIPTING 47