Installing The Operating System - HP ProLiant DL320e User Manual

2. At the boot prompt, type bash and then press Enter. When the process is complete, a command
prompt appears.
3. Load the network drivers using the loadnet script:
/loadnet.sh
4. Load appropriate storage controller drivers:
modprobe -f cciss
5. Load the channel interface driver for iLO:
insmod /opt/hp/hp-ilo/bin/`uname -r`/hp_ilo.ko
6. Mount the network share:
mkdir /mnt/toolkit_share
7. Apply the system BIOS configuration using the CONREP utility:
./conrep -l -f/mnt/toolkit_share/data_files/conrep.dat
8. Apply the Smart Array configuration using the ACU utility:
cd /mnt/toolkit_share/utilities/hpacuscripting
9. Apply the iLO configuration using the HPONCFG utility:
cd /mnt/toolkit_share/utilities
10. Unmount the network share:
umount /mnt/toolkit_share
1 1. Insert the operating system CD.
12. Reboot the server to run the operating system installation.

Installing the operating system

For information on performing an unattended operating system installation, see
installation" (page
Operating system documentation
Kickstart or AutoYAST documentation
12). For additional information, see the following resources:
"Booting and OS
Sample deployment procedure 1 1