Entering And Displaying System Information - Compaq N800v - Evo Notebook - Pentium 4-M 1.7 GHz Software Manual

Security

Entering and Displaying System Information

1. To open Computer Setup, turn on or restart the notebook.
Press
displayed in the lower left of the screen.
❏
❏
2. Access or set your preference(s) by following these
directions:
❏
❏
❏
❏
3. To confirm the information or your preferences, press
4. To save your information or preferences, use the arrow keys
to select File > Save Changes and Exit, then follow the
instructions on the screen.
Your preferences are set as you exit Computer Setup and are
in effect when the notebook restarts.
3–14
while the F10 = ROM Based Setup message is
F10
To change the language, press
For navigation instructions, press
To view general system information, select
File menu > System Information.
To view or enter identification values for system
components, select Security menu > System IDs.
To enable or disable the reporting of the processor serial
number by the processor to software, select
Advanced menu > Device Options.
To specify how the notebook recognizes multiple,
identical port replicators that are identically equipped,
select Advanced menu > Device Options.
◆
To set the notebook to recognize the port replicators
as a single port replicator, select Disable.
◆
To set the notebook to recognize the port replicators
individually by serial number, select Enable.
F2.
F1.
Software Guide
F10.