Easy Cd Creator Tips And Troubleshooting; Playing Cds And Dvds; Using Cd Copier; Creating Media For Use In Other Systems - Compaq N800v - Evo Notebook - Pentium 4-M 1.7 GHz Software Manual

CD and DVD Software

Easy CD Creator Tips and Troubleshooting

Playing CDs and DVDs

Do not initiate Standby or Hibernation while playing any
medium. For more information about this issue, refer to "Using
CDs and DVDs" > "Avoiding Standby and Hibernation," earlier
in this section. For general information about Standby and
Hibernation, refer to the "Power" section of this guide.

Using CD Copier

When you use CD Copier to copy an entire medium to your hard
drive, select the Copy button immediately after selecting the Copy
to HDD First check box.
If there is a delay after you select the Copy to HDD First
check box, the Easy CD Creator software may clear the Copy to
HDD First check box and the medium may not be copied to the
hard drive.
Typical delays include opening or closing the drive tray, pausing
to close an open application, or changing other settings in the
Easy CD Creator software.

Creating Media For Use in Other Systems

A CD-R created with DirectCD can be read by a compatible
CD-ROM drive only if you select the Rearrange the Files option
as you create the CD-R.
A CD-RW, DVD-RAM, or DVD/CD-RW created with DirectCD
can be read by a computer that does not have DirectCD installed
only if you install UDF Reader on your notebook before creating
the medium.
If you did not install UDF Reader at the UDF prompt the first
time you inserted the medium into your notebook, reinsert the
medium, then install UDF Reader at the UDF prompt.
1–20 Software Guide