Compaq Evo n410c - Notebook PC Maintenance And Service Manual page 98

✎
Evo Notebook N400c models only—Models with pointing stick
keyboards have a pointing stick button cable that needs to be
disconnected prior to removing the palm rest. Perform Steps 12
and 13 before removing the palm rest on a pointing stick model.
12. Release the zero insertion force (ZIF) connector to which the
pointing stick button cable is attached 1 and disconnect the
pointing stick button cable 2 (Figure 5-10).
Figure 5-10. Disconnecting the Pointing Stick Button Cable
13. Remove the palm rest and set it aside.
Reverse the above procedure to install the palm rest.
Maintenance and Service Guide
Removal and Replacement Procedures
5–13