Panasonic EW-BW30S Operating Instructions Manual page 28

Saving and Recalling Data
(After approx. (Data
2 seconds) number)
(After approx.
(Year)
2 seconds)
(After approx.
(Date)
2 seconds)
(After approx. (Time)
2 seconds)
Recalling Stored Data
Readings can be recalled after being saved without having to first turn the
device on.
27
English
2. Saving complete.
• Up to 270 sets of readings can be stored in
memory and each is assigned a number.
When the limit is reached, any new readings
are recorded over existing readings starting
with the oldest ones. The data numbers will
also be changed.
• It is not possible to save readings when
measurement has not been carried out
successfully (i.e. when a
As nothing will be recorded the data number
will not be changed.
*
When the
rate, readings can be saved.
• The memory number, measurement year,
date, and time are alternately displayed in
approximately 2 seconds.
1. Press the Memory/Recall button.
• The average of all recorded readings will be
displayed.
• The mark will be displayed.
• If, for example, 270 sets of readings have
been saved in the memory then the average
of those 270 sets of readings will be
displayed.
(cont.)
is displayed).
mark is displayed for the pulse