Intel S3420GPLC - Server Board Motherboard Specification page 126

Appendix B: Integrated BMC Sensor Tables
Rearm Sensors

The rearm is a request for the event status for a sensor to be rechecked and updated
upon a transition between good and bad states. Rearming the sensors can be done
manually or automatically. This column indicates the type supported by the sensor. The
following abbreviations are used to describe a sensor:
A: Auto-rearm
-
M: Manual rearm
-
Default Hysteresis

The hysteresis setting applies to all thresholds of the sensor. This column provides the
count of hysteresis for the sensor, which can be 1 or 2 (positive or negative hysteresis).
Criticality

Criticality is a classification of the severity and nature of the condition. It also controls the
behavior of the Control Panel Status LED
Standby

Some sensors operate on standby power. These sensors may be accessed and/or
generate events when the main (system) power is off, but AC power is present.
114
Intel order number E65697-010
Intel® Server Board S3420GP TPS
Revision 2.4