Table of Contents
Advertisement
Installing and Replacing Desktop Board Components
Connecting the Serial ATA (SATA) Cable
The SATA cable (4-conductor) supports the Serial ATA protocol and connects a single drive to the
desktop board. For correct cable function:
1. Observe the precaution in "Before You Begin" on page 25.
2. Attach the locking cable end to the connector on the board (Figure 21, A).
3. Attach the cable end without the lock to the drive (Figure 21, B).
A
B
OM18161
Figure 21. Connecting the Serial ATA Cable
41
Advertisement
Table of Contents
