Table of Contents
Advertisement
Installing and Replacing Desktop Board Components
5. Connect the Thermal Module Fan cable to the 4-pin processor fan connector on the desktop
board (see Figure 15).
Figure 15. Connect the Thermal Module Fan Cable
For complete instructions on how to attach the Thermal Module to the desktop board and the SRM,
refer to the chassis manual, the boxed processor installation manual, or the Intel World Wide Web
site at:
Integration Overview for Systems Based on the Boxed Intel® Pentium® 4 Processor in the 775-
Land Package (BTX)
Removing the Processor
For instructions on how to remove the processor fan heat sink and processor, refer to the boxed
processor installation manual or the Intel World Wide Web site at:
Integration Overview for Systems Based on the Boxed Intel® Pentium® 4 Processor in the 775-
Land Package (BTX)
35
Advertisement
Table of Contents
