Windows Drivers; Media And Supplies - Oki X400 User Manual

printer model that will be used to print the label. Selecting "Printer
Setup" opens a Printer Driver where the operating parameters of the
printer can be configured.

Windows Drivers

The OKIPOS X400 Windows Drivers lets you print labels using virtually
any Windows application program. The driver can be installed using the
Label Gallery Free START.EXE setup wizard or can be loaded like any
other Windows printer driver using Add Printer from the Windows
Control Panel. The driver is located in the Drivers directory on the
CD-ROM. After the driver is installed, you can send data to the OKIPOS
X400 just like any other printer on your system: simply specify the
OKIPOS X400 model in the Print dialog box of your Windows
application..

Media and Supplies

The OKIPOS X400 comes from the factory set up to operate with OKI
media supplies that are shipped with the printer. These supplies have
been carefully selected to give optimum results with your printer.
Contact OKI sales for ordering information.Other may or may not give
acceptable results. It is also probable that you will have to calibrate the
sensors and heating settings before acceptable results are obtained.
Calibration is accomplished by using the Windows driver or by selecting
of the Printer Settings/Advanced/Immediate/Calibrate from the File
menu. Instructions for calibrating the printer for use with different media
supplies is contained in the OKIPOS X400 Printer Programming Guide
found on the OKIPOS X400 series Ready-To-Go CD-ROM.
24