Intel Desktop Board D845PEMY Product Guide
Setting the BIOS Configuration Jumper Block
Figure 12 shows the location of the BIOS configuration jumper block.
Figure 12. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.
Table 9 shows the jumper settings for the Setup program modes.
Table 9.
Jumper Settings for the BIOS Setup Program Modes
Jumper Setting
3
1
3
1
3
1
38
1
3
J9H2
Mode
Description
Normal (default)
The BIOS uses the current configuration and passwords for booting.
(1-2)
Configure
After the Power-On Self-Test (POST) runs, the BIOS displays the
(2-3)
Maintenance Menu. Use this menu to clear passwords.
Recovery
Recovers BIOS from a diskette in the event of a failed BIOS update.
(None)
OM17243