Connecting The Front Panel Header; Installing A Usb 2.0 Solution; Installing A Front Panel Audio Solution - Intel D845GLVA Product Manual

Intel Desktop Board D845GLVA Product Guide

Connecting the Front Panel Header

Before connecting the front panel header, observe the precautions in "Before You Begin" on
page 19. Refer to Table 31 on page 61 for pin assignments.

Installing a USB 2.0 Solution

Before installing a USB 2.0 solution, observe the precautions in "Before You Begin" on page 19.
Refer to Table 30 on page 61 for pin assignments.

Installing a Front Panel Audio Solution

To install the cable that connects a front panel audio solution to the front panel audio header,
follow these steps:
1. Observe the precautions in "Before You Begin" on page 19.
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
3. Remove the cover. Locate the front panel audio header (J8A1), see Figure 12 on page 57.
4. Remove the two jumpers from the header (this disables the back panel audio connectors).
5. Install a correctly keyed and shielded front panel audio cable.
6. Connect the audio cable to the front panel audio solution.
7. Replace the cover.
To restore back panel operations, follow these steps:
1. Observe the precautions in "Before You Begin" on page 19.
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
3. Remove the cover. Remove the front panel audio cable.
4. Install a jumper on pins 5-6 (rear R channel).
5. Install a jumper on pins 9-10 (rear L channel).
6. Replace the cover.
26