Technical Product Specification for Intel Desktop Boards using the Intel 845GL Chipset
The audio subsystem supports the following audio interfaces:
•
ATAPI-style connectors:
Auxiliary line in
CD-ROM
•
Front panel audio connector
Line out
Mic in
•
Back panel audio connectors:
Line out
Line in
Mic in
1.9.1 Audio Connectors
1.9.1.1
Auxiliary Line In Connector
A 1 x 4-pin ATAPI-style connector connects the left and right channel signals of an internal audio
device to the audio subsystem.
1.9.1.2
ATAPI CD-ROM Audio Connector
A 1 x 4-pin ATAPI-style connector connects an internal ATAPI CD-ROM drive to the audio
mixer.
1.9.2 Audio Subsystem Software
Audio software and drivers are available from Intel's World Wide Web site.
For information about
Obtaining audio software and drivers
1.10 LAN Subsystem
The Network Interface Controller subsystem consists of the ICH4 (with integrated LAN Media
Access Controller) and a physical layer interface device. Features of the LAN subsystem include
•
PCI Bus Master interface
•
CSMA/CD Protocol Engine
•
PCI Power Management
Supports ACPI technology
Supports LAN wake capabilities
11
The front panel audio connector is not present on all boards that contain the audio subsystem. Contact
your Intel sales representative to determine if the front panel audio connector is present on your Intel
Desktop Board.
12
Contact your Intel sales representative to determine if the LAN subsystem is present on your Intel Desktop
Board.
28
11
, including pins for:
Refer to
Section 1.2, page 12
12
: