Security Menu - Intel D845GLLY Using Manual

Technical Product Specification for Intel Desktop Boards using the Intel 845GL Chipset
Table 37. Chipset Configuration Submenu (continued)
Feature
SDRAM Timing Control
SDRAM RAS# Active to
Precharge
SDRAM CAS# Latency
SDRAM RAS# to CAS#
Delay
SDRAM RAS#
Precharge

4.5 Security Menu

To access this menu, select Security from the menu bar at the top of the screen.
Maintenance
The menu represented by Table 38 is for setting passwords and security features.
Table 38.

Security Menu

Feature
Supervisor Password
User Password
Set Supervisor Password
User Access Level
(Note 1)
Set User Password
Clear User Password
(Note 2)
Notes:
1. This feature appears only if a supervisor password has been set.
2. This feature appears only if a user password has been set.
68
Options
• Auto (default)
• Manual – Aggressive
• Manual – User Defined
• 7
• 6
• 5 (default)
• 2.0 (default)
• 2.5
• 3
• 2 (default)
• 3
• 2 (default)
Main Advanced
Options
No options
No options
Password can be up to seven
alphanumeric characters.
• No Access
• View Only
• Limited
• Full (default)
Password can be up to seven
alphanumeric characters.
• Ok (default)
• Cancel
Description
Auto = Timings will be programmed according to the
memory detected.
Manual – Aggressive = Selects most aggressive
user-defined timings.
Manual – User Defined = Allows manual override of
detected SDRAM settings.
Corresponds to tRAS.
Selects the number of clock cycles required to
address a column in memory.
Selects the number of clock cycles between
addressing a row and addressing a column.
Selects the length of time required before accessing
a new row.
Power
Security
Description
Reports if there is a supervisor password set.
Reports if there is a user password set.
Specifies the supervisor password.
Sets BIOS Setup Utility access rights for user
level.
Specifies the user password.
Clears the user password.
Boot Exit